POLYLAC® ABS resin is an acrylonitrile butadiene styrene (ABS) copolymer manufactured by CHIMEI Corporation. It is an amorphous thermoplastic material polymerized from styrene, acrylonitrile and butadiene. Produced with mature production processes, it features consistent batch quality and a full range of grades for various processing methods and application conditions.
POLYLAC® ABS resin is an acrylonitrile butadiene styrene (ABS) copolymer manufactured by CHIMEI Corporation. It is an amorphous thermoplastic material polymerized from styrene, acrylonitrile and butadiene. Produced with mature production processes, it features consistent batch quality and a full range of grades for various processing methods and application conditions.
Structural Performance
1.The styrene component provides rigidity, surface gloss and processability; the acrylonitrile component enhances surface hardness, chemical resistance and thermal stability; the butadiene rubber phase delivers excellent impact strength and low-temperature toughness.
Physical Properties
2.It has balanced mechanical strength, rigidity and toughness, good dimensional stability and low mold shrinkage, plus excellent surface finish for high-gloss appearance. Different grades feature varied melt flow rates, suitable for standard injection molding, extrusion and other forming processes, ideal for complex-shaped products.
Weatherability & Chemical Resistance
3.It has basic resistance to daily detergents, greases and similar chemicals. General-purpose grades are not intended for long-term outdoor exposure; weather-modified grades are recommended for outdoor use.
Compliance
4.Main grades comply with RoHS, REACH SVHC and relevant environmental regulations. Certain grades have obtained UL certification, food contact or medical compliance certifications (refer to official material certificates for confirmation), meeting export regulatory requirements globally.
Product Grades
5.Includes general high-gloss grades, high-impact grades, heat-resistant grades, flame-retardant grades, transparent MABS grades and high-flow grades to meet differentiated requirements for appearance, toughness, heat resistance and flame retardancy.
Home appliance housings & components: TV, refrigerator, air conditioner, kitchen/bath appliance casings, control panels, etc.
Consumer electronics & peripherals: monitor housings, computer cases, speaker enclosures, charger casings, etc.
Automotive interior parts: dashboard components, door trim panels, center console assemblies, etc.
Daily goods & toys: storage containers, cosmetic packaging, educational toys, sports equipment accessories
Industrial & construction products: instrument housings, decorative building components, pipe fittings, etc.
Special compliant grades: medical device housings and food containers (verify compliance of specific grades before use)
Main processing methods: injection molding, extrusion; compatible with secondary finishing such as painting, electroplating and bonding
Adequate drying is recommended prior to processing to reduce moisture-related defects. Refer to official TDS documents for detailed processing parameters.
Base color: natural high-gloss resin; custom coloration can be achieved via compounding
Standard specification: 25 kg per original manufacturer bag
All parameter data are typical reference values only. Actual performance shall be subject to the official TDS and material test reports of the manufacturer. This introduction is for general reference only and does not constitute a formal product specification or warranty.